Mirror stainless steel superhydrophobic coating, easy to clean stainless steel long-lasting oleophobic nano coating nano-Etsu easy to clean coating, is a single-component special Electronics Co., Ltd., Dongguan City, sapphire from Shin-Etsu Chemical Co., the company introduced the club easy to clean nano-coating The coating is designed specifically for stainless steel sink surface protective coatings. After curing the coating with good metal texture and excellent hydrophobic and oleophobic effect, also has the characteristics of easy to clean surface stains can be easily erased. The product is outdoor weather resistance, excellent durability, especially on stainless steel products. Mainly used in stainless steel, anti-fingerprint and anti-pollution treatment steel, copper, aluminum and other ferrous and non-ferrous metal products, enhanced protection, on light and antifouling effect. Ingredients: Polymers: nano-modified fluorine resin. Solvent: inert organic solvent, such as PMA and the like. Wear components: nano-silica. Special organics were: curing agent for the coating liquid component. Features temperature curing, the film hardness up 3-4H easy to clean, easy to clean surface dirt low surface energy stain resistance Good low surface tension (<24 × 10-3N / m), with good hydrophobic oleophobic good transparency , high hardness, high fullness Construction: 1. Pre-treatment before construction · painting first object to be coated with a surface treatment to remove worn on the film surface, rust, grease, scale and debris, required to achieve without rust, no oil, no dust, water marks · rust by blasting to the surface Sa2.5 level (GB8923-88) or manual rust to St3 level (GB8923-88) · Clean after treatment should be promptly painted to prevent re-rusting ? Require construction environment without dust, exhaust air cleaning devices or appropriate equipment to ensure the construction quality 2. coating process: a substrate inspection - Wipe dust - on the work piece - electrostatic precipitator - spray paint - paint leveling, dry surface - Baking - Cooling - work which must stir before the next use of paint, you can use the air discharge pressure spraying Construction: 0.3-0.4MPa, spraying distance: 15-25 cm, recommended film thickness: 15-25 micron under normal temperature conditions every 10 minutes spraying a construction temperature: 10-40 ° C, relative humidity: 25% -75% Storage: Recommended storage temperature: 18 ~ 25 ℃ Life: 12 months Packing: 500g / tank protection: Safety Recommendations / Transport Regulations, please read the safety manual